Filtration Of Liquids & Gases From Coarse To Submicronic
Customized Filtration Solutions
Oil Purification Systems
GlobeCore Ltd is a leader in the field of
development and implementation of industrial equipment
GlobeCore Ltd develops and implements of industrial equipment for reclamation, purification, drying and degassing of transformer, turbine, industrial and other oils, reclamation of all kinds of mineral oils with restoration of color and operational specifications.
Oil reclamation involves new technologies in energy sector and industry in general.
The equipment is in compliance with all relevant international standards. All products certified accordingly. Quality control complies with ISO 9001:2001.
Equipment list is presented in the product section of this website, where you can also find detailed descriptions of products, photos and technical data. For full view, select corresponding menu item.
The unit is designed for heating, drying and refining of transformer oil from mechanical impurities, water and acids. It is also intended for insulation restoration of current and voltage oil-filled transformers, for solid insulation cleaning of power transformers, for insulation drying of power transformers, transformer oil regeneration with granular synthetic or natural adsorbents, regeneration of granular synthetic or natural adsorbents with vacuum, for regeneration and refining of other types of mineral and synthetic oil.
Applications
- Purifying and drying Transformer Oil in bulk
- Vacuum filling of Transformers and Electrical equipment
- Drying and Purifying oil in transformers (on and off-line)
- Vacuum Drying of Transformers
Benefits
- Removes Dissolved Moisture Transformer Oil
- Reduces combustible gases and oxygen
- Improves oil dielectric values
- Improves transformer power factor
- Extends oil service life
- Extends transformer service life and reliability
URM-0.7 oil reclamation system
The unit is designed for heating, drying and refining of transformer oil from mechanical impurities, water and acids. It is also intended for insulation restoration of current and voltage oil-filled transformers, for solid insulation cleaning of power transformers, for insulation drying of power transformers, transformer oil regeneration with granular synthetic or natural adsorbents, regeneration of granular synthetic or natural adsorbents with vacuum, for regeneration and refining of other types of mineral and synthetic oil.
This system is designed for reclamation (restoration to operational condition) of electric insulation oils with viscosity up to 70cSt at 50°С.
The system lowers acid number and dielectric loss tangent by over 90%. The oil reclamation system allows lightening and purification of oil with application of bleaching earth.
The unit can be used during installation, repairs and operation of oil-filled high voltage equipment up to 1150kW (power transformers, high voltage switches, etc).
Operating ambient conditions for the URM-0.7 system: - ambient temperature range +10ºС … +35ºС; - atmospheric pressure 84 to 106,7 kPa (24.80 to 31.49 in. hg.); - elevation up to 2000 м (6562 feet) above sea level - explosion and fire proof building. URM-0.7-s main components are: - reclamation section; - press-filter. Reclamation section consists of: - oil heater; - two reactors; - intermediate tank; - circulation pump; - input pumps; - filtration pump; - absorbent vessels; - settling tank; - control unit; - piping. The section is mounted on a metal frame with base tray. Applications
|
|
|||||||||||||||||||||||||||||||||||||
| Oil regeneration, oil purification, recycling of waste transformer oil. Disposal of sludge. Universal regeneration unit and clarification of mineral oils (motor, transmission, hydraulic, etc.) Purification, lighting, and removing sulfur from diesel and heating and other fuels, lighting pyrolysis fluid and odor removal. Deep cleaning, lighting oils. | ||||||||||||||||||||||||||||||||||||||
UVM-6 transformer oil processing system
The unit is designed for heating, drying and refining of transformer oil from mechanical impurities, water and acids. It is also intended for insulation restoration of current and voltage oil-filled transformers, for solid insulation cleaning of power transformers, for insulation drying of power transformers, transformer oil regeneration with granular synthetic or natural adsorbents, regeneration of granular synthetic or natural adsorbents with vacuum, for regeneration and refining of other types of mineral and synthetic oil.
UVM-6 system is designed for degassing, solid particle removal, nitrogenation and heating of transformer oil, filled into power transformers up to 1150 kW.
The oil processing station can be used for heating of oil filled electric equipment with hot transformer oil, as well as for vacuumizing power transformers.
The UVM-6 can be used for installation, repair and operation of power equipment.
Application of the unit in closed rooms required exhaust ventilation.
Applications
Benefits
|
|
||||||||||||||||||||||||||||
| Oil regeneration, oil purification, recycling of waste transformer oil. Disposal of sludge. Universal regeneration unit and clarification of mineral oils (motor, transmission, hydraulic, etc.) Purification, lighting, and removing sulfur from diesel and heating and other fuels, lighting pyrolysis fluid and odor removal. Deep cleaning, lighting oils. | |||||||||||||||||||||||||||||
UVM-10M transformer oil processing system
The unit is designed for heating, drying and refining of transformer oil from mechanical impurities, water and acids. It is also intended for insulation restoration of current and voltage oil-filled transformers, for solid insulation cleaning of power transformers, for insulation drying of power transformers, transformer oil regeneration with granular synthetic or natural adsorbents, regeneration of granular synthetic or natural adsorbents with vacuum, for regeneration and refining of other types of mineral and synthetic oil.
UVM-10M system is designed for degassing, solid particle removal, nitrogenation and heating of transformer oil, filled into power transformers up to 1150 kW.
UVM-10M oil purification system consists of two primary components: oil section (OS) and vacuum section (VS).
The oil processing station can be used for heating of oil filled electric equipment with hot transformer oil, as well as for vacuumizing power transformers.
The UVM-10M can be used for installation, repair and operation of power equipment.
Application of the unit in closed rooms required exhaust ventilation.
Applications
Benefits
|
|
||||||||||||||||||||||||||||||||||||||
| Oil regeneration, oil purification, recycling of waste transformer oil. Disposal of sludge. Universal regeneration unit and clarification of mineral oils (motor, transmission, hydraulic, etc.) Purification, lighting, and removing sulfur from diesel and heating and other fuels, lighting pyrolysis fluid and odor removal. Deep cleaning, lighting oils. | |||||||||||||||||||||||||||||||||||||||
UVM-10-10 transformer oil processing system
UVM-10-10 system is designed for degassing, solid particle removal, nitrogenation and heating of transformer oil, filled into power transformers up to 1150 kW
The oil processing station can be used for heating of oil filled electric equipment with hot transformer oil, as well as for vacuumizing power transformers.
The UVM-10-10 can be used for installation, repair and operation of power equipment.
This system is containerized, with lockable door.
The UVM-10-10 cannot be operated in explosive, toxic or chemically aggressive environments Application of the unit in closed rooms required exhaust ventilation.
Applications
Benefits
|
|
||||||||||||||||||||||||||||||||||
| Oil regeneration, oil purification, recycling of waste transformer oil. Disposal of sludge. Universal regeneration unit and clarification of mineral oils (motor, transmission, hydraulic, etc.) Purification, lighting, and removing sulfur from diesel and heating and other fuels, lighting pyrolysis fluid and odor removal. Deep cleaning, lighting oils. | |||||||||||||||||||||||||||||||||||
Oil purfication system SMM-1.7Z
Oil purification system SMM-1.7Z is designed for removal of solids and water from lubrication and insulation oils with viscosity less than 70 cSt at 50 °С, with zeolite absorbent and for subsequent regeneration of zeolite directly in the unit.
The unit is used for installation, repairs and operation of oil filled high voltage equipment with voltages up to 500 kV (power transformers, high voltage switches etc). Ambient conditions for operation:
- ambient temperature + 10 to + 35°С;
- atmospheric pressure 84 to 106,7 kPa (26.77 to 31.49 in.hg);
- elevation up to 2000 m;
- fire and explosion proof building.
Applications
Benefits
|
|
|||||||||||||||||||||||||
| Oil regeneration, oil purification, recycling of waste transformer oil. Disposal of sludge. Universal regeneration unit and clarification of mineral oils (motor, transmission, hydraulic, etc.) Purification, lighting, and removing sulfur from diesel and heating and other fuels, lighting pyrolysis fluid and odor removal. Deep cleaning, lighting oils. | ||||||||||||||||||||||||||
Oil purification system SMM-3.5Z
Oil purification system SMM-3.5Z is designed for removal of solids and water from lubrication and insulation oils with viscosity less than 70 cSt at 50 °С, with zeolite absorbent and for subsequent regeneration of zeolite directly in the unit.
The unit is used for installation, repairs and operation of oil filled high voltage equipment with voltages up to 500 kV (power transformers, high voltage switches etc). Ambient conditions for operation:
- ambient temperature + 10 to + 35°С;
- atmospheric pressure 84 to 106,7 kPa (26.77 to 31.49 in.hg);
- elevation up to 2000 m;
- fire and explosion proof building.
Applications
Benefits
|
|
|||||||||||||||||||||||||||||||
| Oil regeneration, oil purification, recycling of waste transformer oil. Disposal of sludge. Universal regeneration unit and clarification of mineral oils (motor, transmission, hydraulic, etc.) Purification, lighting, and removing sulfur from diesel and heating and other fuels, lighting pyrolysis fluid and odor removal. Deep cleaning, lighting oils. | ||||||||||||||||||||||||||||||||
Oil purification system SMM-5Z
Oil purification system SMM-5Z is designed for removal of solids and water from lubrication and insulation oils with viscosity less than 70 cSt at 50 °С, with zeolite absorbent and for subsequent regeneration of zeolite directly in the unit.
The unit is used for installation, repairs and operation of oil filled high voltage equipment with voltages up to 500 kV (power transformers, high voltage switches etc). Ambient conditions for operation:
- ambient temperature + 10 to + 35°С;
- atmospheric pressure 84 to 106,7 kPa (26.77 to 31.49 in.hg);
- elevation up to 2000 m;
- fire and explosion proof building.
Applications
Benefits
|
|
||||||||||||||||||||||||||||||||||||||||
| Oil regeneration, oil purification, recycling of waste transformer oil. Disposal of sludge. Universal regeneration unit and clarification of mineral oils (motor, transmission, hydraulic, etc.) Purification, lighting, and removing sulfur from diesel and heating and other fuels, lighting pyrolysis fluid and odor removal. Deep cleaning, lighting oils. | |||||||||||||||||||||||||||||||||||||||||
Mobile oil purification zeolite system MZU-1,7
The oil purification system MZU-1.7 is designed to remove solids and water and to redice acidity of electric insulation oils with viscosity of no more than 70 cSt at 50ºС. Invertable sorbent cartridges ZP-260 are designed to purify and dry transformer oil with zeolite absorbent.
The system is used for installation, repair and operation of oil filled equipment with up to 1150 kV voltage (power transformers, high voltage switches etc).
Ambient conditions for operation:
- ambient temperature + 10 to + 35°С;
- atmospheric pressure 84 to 106,7 kPa (26.77 to 31.49 in.hg);
- elevation up to 2000 m;
- fire and explosion proof building
The system consists of two independent units, BNF for heating and filtration and ZP-260 (zeolite absorber), which are connected by flexible hoses.
Applications
Benefits
|
|
||||||||||||||||||||||||||||||||||
| Oil regeneration, oil purification, recycling of waste transformer oil. Disposal of sludge. Universal regeneration unit and clarification of mineral oils (motor, transmission, hydraulic, etc.) Purification, lighting, and removing sulfur from diesel and heating and other fuels, lighting pyrolysis fluid and odor removal. Deep cleaning, lighting oils. | |||||||||||||||||||||||||||||||||||
Zeolite drying cabinet ZDC-15
Zeolite drying cabinet, also referred to as drying cabinet, is designed to remove moisture from zeolite. This unit is a must for facilities that use absorbent for deep dehydration of transformer oils. Other applications include dying of welding electrodes.
Ambient conditions for operation:
- ambient temperature + 10 to + 35°С;
- atmospheric pressure 84 to 106,7 kPa (26.77 to 31.49 in.hg);
The unit is mounted on a frame of profiled metal and steel sheets. The frame supports drying chamber and two side chambers, where electric heating rods are installed. A fan, which supplies air from the chamber to the heaters and than back to the chamber through opernings in its sides, is located on the back side of the frame. Upper part of the drying chamber is equipped with two manufolds and the lower part has a manifold with slide valve. The frame is thermally insulated to reduce heat losses.
Control panel is mounted on a well next to the cabinet and allows for easy adjustment of the zeolite drying process.
| Oil regeneration, oil purification, recycling of waste transformer oil. Disposal of sludge. Universal regeneration unit and clarification of mineral oils (motor, transmission, hydraulic, etc.) Purification, lighting, and removing sulfur from diesel and heating and other fuels, lighting pyrolysis fluid and odor removal. Deep cleaning, lighting oils. |
|
Zeolite reclamation system BRZ-100
The unit is designed for heating, drying and refining of transformer oil from mechanical impurities, water and acids. It is also intended for insulation restoration of current and voltage oil-filled transformers, for solid insulation cleaning of power transformers, for insulation drying of power transformers, transformer oil regeneration with granular synthetic or natural adsorbents, regeneration of granular synthetic or natural adsorbents with vacuum, for regeneration and refining of other types of mineral and synthetic oil.
Zeolite reclamation system BRZ is designed for restoration of operational specifications of zeolite in ZP-260 cartridges.
This system can be applied by energy generation, industrial and other facilities which use ZP-260 sorbent cartridges for dehydration of transformer and lubrication oils.
The system comprizes the following major components:
- air heater;
- air blower;
- air cooler;
- vacuum pump;
- control system;
- base frame with tilt wheels;
- technical components, interconnected with flexible hoses;
- exhaust device.
|
|
|||||||||||||||||||||||||
| Oil regeneration, oil purification, recycling of waste transformer oil. Disposal of sludge. Universal regeneration unit and clarification of mineral oils (motor, transmission, hydraulic, etc.) Purification, lighting, and removing sulfur from diesel and heating and other fuels, lighting pyrolysis fluid and odor removal. Deep cleaning, lighting oils. | ||||||||||||||||||||||||||
Air drying system "Sukhoway-4"
Suhoway-4 air drying system is designed for dehydration and solid removal from air, used for blowing of power transformer tanks and other electric equipment during instllation, maintenance and repair operations to protect electric insulation from moisture when the active core is open to outside environment.
The system operaties as two cyclic adsorbers, filled with synthetic zeolite for drying and a filter for removal of dust from the air.
The system is a metal container, divided into two compartments, with a muffler on the input connector and air distribution device on the outflow connector, with disk gates. The air distributor has a pressure gauge and condensate drain valve.
Upper part of the container is divided into two sections. One section contains adsorbers with air heaters. The absorbers are filled with sysmthetic zeolite and insulated with slagwool. The adsorbers are connected with an air duct. The other section contains control cabinet and dry air outflow connector.
Applications
Benefits
|
|
||||||||||||||||||||||||||||||||||||||||||||||
| Oil regeneration, oil purification, recycling of waste transformer oil. Disposal of sludge. Universal regeneration unit and clarification of mineral oils (motor, transmission, hydraulic, etc.) Purification, lighting, and removing sulfur from diesel and heating and other fuels, lighting pyrolysis fluid and odor removal. Deep cleaning, lighting oils. | |||||||||||||||||||||||||||||||||||||||||||||||
Oil purification system SMM-2,2S
Oil purification system SMM-2.2S is designed to purify petrochemical fluids (oils, hydrolic fluids, diesel fuel) from solid contaminants with density higher than that for the fluid purified, and water. Viscosity of the fluid must not exceed 300 cSt at 20ºС. If the viscosity of the fluid is 300 cSt, capacity of the system will not exceed 0,6 m3/hour.
The system ensures required degree of fluid purity for manufacturing, maintenance and repair of various energy related equipment, road construction heavy duty machines, motors, manufacturing equipment etc to improve reliability and extend life time of hydro-oil assemblies.
The system can operate in two modes. The first mode is to accumulate solid contaminants and water on centrifuge hull, (with drain of low-adhesion water and contaminants to container during pauses in operation). The second mode is to drain the accumulated water from the centrifuge continuously. Mode of operation is chosen depending on the amount of water and solid contaminants in the liquids and on the duration of the system’s continuous operation.
THIS SYSTEM CANNOT BE USED TO PURIFY FLAMMABLE LIQUIDS WITH FLASHPOINT LESS THAN 65ºС, as well as toxic liquids and liquids aggressive to aluminum alloys, non-corrosion resistant steels and oil-resistant rubber.
Ambient conditions for operation: - ambient temperature + 10 to + 35°С; - atmospheric pressure 84 to 106,7 kPa (26.77 to 31.49 in.hg); - elevation up to 2000 m; - fire and explosion proof building. Applications
Benefits
|
|
|||||||||||||||||||||||||||||||||||||
| Oil regeneration, oil purification, recycling of waste transformer oil. Disposal of sludge. Universal regeneration unit and clarification of mineral oils (motor, transmission, hydraulic, etc.) Purification, lighting, and removing sulfur from diesel and heating and other fuels, lighting pyrolysis fluid and odor removal. Deep cleaning, lighting oils. | ||||||||||||||||||||||||||||||||||||||
Oil purification system SMM-0.16
SMM-0.16 oil purifiation system is designed for removal of solids and and thermo-vacuum removal of water and gases from lubricant and electric insulation oils with viscosity of no more than 70 cSt at 50С.
The oil purification system is used for maintnenace, repair and operation of oil-filled high-voltage equipment with voltage up to 1150 kV (power transformers, high voltage switches etc).
Ambient conditions for operation: - ambient temperature + 10 to + 35°С; - atmospheric pressure 84 to 106,7 kPa (26.77 to 31.49 in.hg); - elevation up to 2000 m; - fire and explosion proof building.
Applications
Benefits
|
|
||||||||||||||||||||||||||||||||||
| Oil regeneration, oil purification, recycling of waste transformer oil. Disposal of sludge. Universal regeneration unit and clarification of mineral oils (motor, transmission, hydraulic, etc.) Purification, lighting, and removing sulfur from diesel and heating and other fuels, lighting pyrolysis fluid and odor removal. Deep cleaning, lighting oils. | |||||||||||||||||||||||||||||||||||
Oil purification system SMM-1
Oil purification system SMM-1 is designed for removal of solid particles, water and gases from electric insulation oils with viscosity up to 70 cSt at 50ºС.
The system purifies oil to class 9 purity with source purity class 13 (impurities by weight no more than 0,004%) after multiple passes of the product through filter block.
The oil purification system can be used for installation, repair and operation of oil filled high-voltage equipment up to 1150 kV (power transformers, high voltage switches etc).
Ambient conditions for operation: - ambient temperature + 10 to + 35°С; - atmospheric pressure 84 to 106,7 kPa (26.77 to 31.49 in.hg); - elevation up to 2000 m; - fire and explosion proof building.
Applications
Benefits
|
|
||||||||||||||||||||||||||||||||||
Oil purification system SMM-1,7A
The unit is designed for heating, drying and refining of transformer oil from mechanical impurities, water and acids. It is also intended for insulation restoration of current and voltage oil-filled transformers, for solid insulation cleaning of power transformers, for insulation drying of power transformers, transformer oil regeneration with granular synthetic or natural adsorbents, regeneration of granular synthetic or natural adsorbents with vacuum, for regeneration and refining of other types of mineral and synthetic oil.
Oil purification system SMM-1.7A is designed for removal of solid particles, water and gases from electric insulation oils with viscosity up to 70 cSt at 50ºС.
The system purifies oil to class 9 purity with source purity class 13 (impurities by weight no more than 0,004%) after multiple passes of the product through filter block.
The oil purification system can be used for installation, repair and operation of oil filled high-voltage equipment up to 1150 kV (power transformers, high voltage switches etc).
Ambient conditions for operation: - ambient temperature + 10 to + 35°С; - atmospheric pressure 84 to 106,7 kPa (26.77 to 31.49 in.hg); - elevation up to 2000 m; - fire and explosion proof building. Applications
Benefits
|
|
||||||||||||||||||||||||||||||||||
| Oil regeneration, oil purification, recycling of waste transformer oil. Disposal of sludge. Universal regeneration unit and clarification of mineral oils (motor, transmission, hydraulic, etc.) Purification, lighting, and removing sulfur from diesel and heating and other fuels, lighting pyrolysis fluid and odor removal. Deep cleaning, lighting oils. | |||||||||||||||||||||||||||||||||||
Oil purification system SMM-2,2
Oil purification system SMM-2.2 is designed for removal of solid particles, water and gases from electric insulation oils with viscosity up to 70 cSt at 50ºС.
The system is comprised of oil pumps, retainer and fine filters, vacuum tank, vacuum pump, control cabinet, piping system. The control cabinet contains circuitry for control of the system operation. Control circuit is protected by automatic switch.
The front panel of the control cabinet contains light indication of pump and heater operation.
Oil enters the system via the mesh filter, oil gear pump, and retainer to the vacuum tank jacket, where it ie heated to +55 / 60 °С by electric heaters. The oil then passes into the vacuum tank, where moisture from the oil is evaporated. Water vapor and gases are removed nu the vacuum pump, and the dehydrated oil passes through fine filter. All gear pumps are equipped with safety valves.
Applications
Benefits
|
|
||||||||||||||||||||||||||||||||||
| Oil regeneration, oil purification, recycling of waste transformer oil. Disposal of sludge. Universal regeneration unit and clarification of mineral oils (motor, transmission, hydraulic, etc.) Purification, lighting, and removing sulfur from diesel and heating and other fuels, lighting pyrolysis fluid and odor removal. Deep cleaning, lighting oils. | |||||||||||||||||||||||||||||||||||
Oil purification system SMM-4A
Oil purification system SMM-4A is designed for removal of solids, gas and water from electric insulation oils with viscosity up to 70 cSt at 50ºС.
The system purifies oil to class 9 purity with source purity class 13 (impurities by weight no more than 0,004%) after multiple passes of the product through filter block.
The oil purification system can be used for installation, repair and operation of oil filled high-voltage equipment up to 1150 kV (power transformers, high voltage switches etc).
Ambient conditions for operation: - ambient temperature + 10 to + 35°С; - atmospheric pressure 84 to 106,7 kPa (26.77 to 31.49 in.hg); - elevation up to 2000 m; - fire and explosion proof building.
Applications
Benefits
|
Oil regeneration, oil purification, recycling of waste transformer oil. Disposal of sludge. Universal regeneration unit and clarification of mineral oils (motor, transmission, hydraulic, etc.) Purification, lighting, and removing sulfur from diesel and heating and other fuels, lighting pyrolysis fluid and odor removal. Deep cleaning, lighting oils. |
|||||||||||||||||||||||||||||||
Mobile oil purification system SMM-0,6F
The SMM-0,6F type systems are designed for purification of diesel fuel, transformer, turbine, hydraulic and industrial oils from solids, cinder, solved and partially free water, water-soluble acids and bases.
The system is equipped with filters, which absorb up to 98% of water and improve purily class of the oil.
Ambient conditions for operation: - ambient temperature + 10 to + 35°С; - atmospheric pressure 84 to 106,7 kPa (26.77 to 31.49 in.hg); - elevation up to 2000 m; - fire and explosion proof building.
Applications
Benefits
|
Oil regeneration, oil purification, recycling of waste transformer oil. Disposal of sludge. Universal regeneration unit and clarification of mineral oils (motor, transmission, hydraulic, etc.) Purification, lighting, and removing sulfur from diesel and heating and other fuels, lighting pyrolysis fluid and odor removal. Deep cleaning, lighting oils. |
Mobile oil purification system SMM-4F
The unit is designed for heating, drying and refining of transformer oil from mechanical impurities, water and acids. It is also intended for insulation restoration of current and voltage oil-filled transformers, for solid insulation cleaning of power transformers, for insulation drying of power transformers, transformer oil regeneration with granular synthetic or natural adsorbents, regeneration of granular synthetic or natural adsorbents with vacuum, for regeneration and refining of other types of mineral and synthetic oil.
The SMM-0,6F type systems are designed for purification of diesel fuel, transformer, turbine, hydraulic and industrial oils from solids, cinder, solved and partially free water, water-soluble acids and bases.
The system is equipped with filters, which absorb up to 98% of water and improve purily class of the oil.
Ambient conditions for operation: - ambient temperature + 10 to + 35°С; - atmospheric pressure 84 to 106,7 kPa (26.77 to 31.49 in.hg); - elevation up to 2000 m; - fire and explosion proof building. Applications
Benefits
|
Oil regeneration, oil purification, recycling of waste transformer oil. Disposal of sludge. Universal regeneration unit and clarification of mineral oils (motor, transmission, hydraulic, etc.) Purification, lighting, and removing sulfur from diesel and heating and other fuels, lighting pyrolysis fluid and odor removal. Deep cleaning, lighting oils. |
Oil purification system SMM-0,5A
The SMM-0.5A oil purification system is designed for removal of solids and water from transformer, turbine, hydraulic, industrial and other oils. The system is used for installation, repair and operation of oil-filled equipment.
Ambient conditions for operation: - ambient temperature + 10 to + 35°С; - atmospheric pressure 84 to 106,7 kPa (26.77 to 31.49 in.hg); - elevation up to 2000 m; - fire and explosion proof building.
Applications
Benefits
|
Oil regeneration, oil purification, recycling of waste transformer oil. Disposal of sludge. Universal regeneration unit and clarification of mineral oils (motor, transmission, hydraulic, etc.) Purification, lighting, and removing sulfur from diesel and heating and other fuels, lighting pyrolysis fluid and odor removal. Deep cleaning, lighting oils. |
Oil purification system SMM-0.6R
The SMM-0.6R oil purification system is designed for removal of solids, gases and water from electric insulation oils with viscosity up to 70 cSt at 50°С.
The unit privides for purification to class 9 purilty with incoming purity class 13 (impurities by weight no more than 0.004%) after multiple passes of the product through filter assembly.
The oil purification system can be used for installation, repair and operation of oil filled high-voltage equipment up to 1150 kV (power transformers, high voltage switches etc).
Ambient conditions for operation: - ambient temperature + 10 to + 35°С; - atmospheric pressure 84 to 106,7 kPa (26.77 to 31.49 in.hg); - elevation up to 2000 m; - fire and explosion proof building.. Applications
Benefits
|
Oil regeneration, oil purification, recycling of waste transformer oil. Disposal of sludge. Universal regeneration unit and clarification of mineral oils (motor, transmission, hydraulic, etc.) Purification, lighting, and removing sulfur from diesel and heating and other fuels, lighting pyrolysis fluid and odor removal. Deep cleaning, lighting oils. |
Oil purification system SMM-4V
The SMM-4V oil purification system is designed for removal of solids and thermovaccum removal of water and ases from lubricating and electric insuation oils, with viscosity up to 70 cSt.
This system is explosion proof.
Explosion protection class Exd II Ct4.
Principles of opeation in filtration and thermovacuum purification mode.
The oil enters the unit via the unput pump, mesh filer and filter cartridge and goes to vacuum tank sprayer. Vacuum in the tank is maintained by the vacuum pump and is controlled with the vacuum pressure gauge.
Purified air, entering the tank, removes vapor and gasesfrom the surface of the oil drying it. Moinst air is discharged by the vacuum pipe into the atmosphere, after passing through oil separator filter.
Purified oil is then directed to clean oil tank.
Operation in degassing mode.
The oil for processing enters the vacuum tank’s spraye via the pump, mesh filter and cartridge filtter. After that the oil goes into the vacuum tankм.
Gases separate from the oil in the sprayer The gases are discharged into the atmosphere. The degassed oil runs through fine filter and non retirn valve an oil output tank.
Applications
Benefits
|
|
|||||||||||||||||||||||||
| Oil regeneration, oil purification, recycling of waste transformer oil. Disposal of sludge. Universal regeneration unit and clarification of mineral oils (motor, transmission, hydraulic, etc.) Purification, lighting, and removing sulfur from diesel and heating and other fuels, lighting pyrolysis fluid and odor removal. Deep cleaning, lighting oils. | ||||||||||||||||||||||||||
Stream oil heater PPM series
The unit is designed for heating, drying and refining of transformer oil from mechanical impurities, water and acids. It is also intended for insulation restoration of current and voltage oil-filled transformers, for solid insulation cleaning of power transformers, for insulation drying of power transformers, transformer oil regeneration with granular synthetic or natural adsorbents, regeneration of granular synthetic or natural adsorbents with vacuum, for regeneration and refining of other types of mineral and synthetic oil.
PPM series stream oil heaters are designed for heating of transformer oils for filling, replacement or drying of transformers. They can also be used for mineral, industrial, turbine and other oils, as well as other liquids which do not cause corrosion of the contruction materials of these heaters.
The heaters can be used for repair and maintnence of transformers, at power stations and for other oil related applications. The heaters can be operated both indoors and outdoors under sufficient cover.
The heater consists of a welded frame with two heating tanks inside. Each tank is equipped with a tubular grate, on which 12 tubular electric heaters at 3 kW each are mounted. Heater terminals are protected by jacket.
Inegrated conrol unit is mounted on the tanks.
The heater is equipped with input valve, mesh filter, air and oil discharge vlaves and two thermo-resistors.
No |
Heater specifications |
Value |
Value |
Value |
PPM-18 |
PPM-50 |
PPM-70 |
||
1 |
Max throughput at 0,2 Mpa in the feeder line, m3/hour, |
1,5 |
3,2 |
4,5 |
2 |
Max liquid pressure, MPa, |
0,6 |
3 |
0,6 |
3 |
Rater power consumption, kW |
18 |
55,5 |
72 |
4 |
Three phase power voltage at 50 HZ, V |
380/220 |
380 |
380 |
5 |
Max heating ºС, |
120 |
70 |
120 |
6 |
Dimensions, mm, - length - width - height |
600 700 1700 |
1200 800 1900 |
1650 750 1450 |
7 |
Weight, kg |
90 |
600 |
350 |
Stream heater PPM-600
The unit is designed for heating, drying and refining of transformer oil from mechanical impurities, water and acids. It is also intended for insulation restoration of current and voltage oil-filled transformers, for solid insulation cleaning of power transformers, for insulation drying of power transformers, transformer oil regeneration with granular synthetic or natural adsorbents, regeneration of granular synthetic or natural adsorbents with vacuum, for regeneration and refining of other types of mineral and synthetic oil.
Stream liquid heater is designed for heating of oil and other liquids with kinetic viscosity less than 70 mm2/s at 50ºС, which do not cause corrosion of heater construction materials, in temperature range from +20˚С to +90˚С.
The heater can be used for heating of oil for oil-filled equipment, as well as for heating petrochemical products in petrochemical technology processes.
The heater is explosion protected to Exd II CT4.
The heater consists of a frame with three heating section, each section includes: jacketed-pipe heat exchangers, heater, pump, extension tank, control panel, piping with corresponding valves and regulators, input and output collectors.
Process parameters are controlled by: temperature regulators, 2TRM “Oven” with TSM type sensors, pressure gauges and thermometers for visual temperature control.
|
Oil regeneration, oil purification, recycling of waste transformer oil. Disposal of sludge. Universal regeneration unit and clarification of mineral oils (motor, transmission, hydraulic, etc.) Purification, lighting, and removing sulfur from diesel and heating and other fuels, lighting pyrolysis fluid and odor removal. Deep cleaning, lighting oils. |
|
||||||||||||||||||||
Engineered Filtration, Inc. |
||||||||||||||||||||
