The new IPERJET DF dust collector is suitable for extraction and filtration of welding fume, dust, small quantities of chips, and dust and fume created by from plasma cutting. The IPERJET is designed to accept dust collector horizontal cartridges.

The filter unit has an inlet chamber where most
of the solids fallout by gravity into a solids collecting bin.

With the labyrinth air flow pattern and the high efficiency filter cartridges, complete filtration and removal of the remaining dust is completed.

The high performance fan, placed at the top of the unit, assures a high suction capacity and a low noise level. Pneumatic back pulsing by an adjustable cleaning system (with compressed air) allows the system will operate at peak efficiency while maintaining a long cartridge life.

How It Works;

(1) Polluted air is evacuated from the work environment by a powerful fan (6) located at the top of the unit.

The polluted air passes downward through the settling chamber (2) where gravity forces the larger solids to fall out into the collection bin (3)

Finer solids are removed by the horizontally mounted pleated cellulose cartridges (5). Once the cartridges reach a preset pressure drop, the control system pulses the cartridges with a blast of compressed air (7) and the solids collected on the cartridges fall out to the collection bin (4).

Clean air is then exhausted out the top (8).

TECHNICAL DETAILS