From the simplest of indexing media type filters to more complex integrated systems with two or three filtration stages, the Losma Liquid Filtration Range offers various different types of filteration to cope with all applications.

 

 

 

 
 
  Seven models with flow rates from 13.2 to 105 GPM (6.6 to 53 GPM for neat oil), using a high quality fabric for filtration. Also available in 304 stainless steel. The Detex is used for the filtration of neat oils and water based coolants that are contaminated with magnetic and/or non-magnetic particles. The DETEX model offers a cost efficient and effective filtration solution with minimal maintenance and a limited expenditure. These filter beds are available with a variety of different filtration levels (from 50 to 10 microns). The stainless steel units are used in the chemical, food and glass industries for the filtratuion of water.
  This DEMAG is a magnetic separator utilizing a number of ferromagnetic discs which magnetically remove the solid contaminants present in the coolant/lubricant. This model is attractive due to its low running costs - practically zero. Like DETEX, DEMAG treats up to 105 GPM.
  This DECOM series is a combination of the previous two methods of filtration. It uses two stages of filtration to remove solid containants. First, magnetic particles are removed from the liquid then the liquid flows by gravity down onto a suitable grade of filter fabric depending on final coolany cleanliness required.
The DECOM series is considered by the market to be one of the best filtration solutions and has a wide flow rate range (13.2 to 105 GPM). This model provides the very best filtration avaialbe.
 
  This series evolved as a result of the advances made in machine tool technology. The RIVER Losma's response to the arrival of high pressure cooling (HPC). The RIVER is used in applications where precision machining demands an extremely high quality coolant. The RIVER offers guaranteed filtration which uses pre-filtration stages (magnetic and/or fabric) and after filteration ( Cartridges or bags) so that the lubricant/coolant has the assured levels of purity required for precision machining with tolerances down to tenths of a micron.
The RIVER series is available with high-pressure return pumps (up to 100 bar), filtration levels to 5 microns and flow rates from 6 to 26 GPM when working on neat oil. They are supplied with sophisticated systems for control and safety. Routine maintenance can be carried out without any machine downtime.