Engineered Filtration, Inc. are experts in the field of oil purification equipment. Our filtration equipment is designed to remove water from oil; filter particulate out of oil; correct oxidation; correct total acid number (TAN), among others. We have the ability to offer custom engineered oil purification products to solve your oil filtration problems. Some of the oils we specialize in are:

Turbine Oil
Paper Machine Oil
Lubricating Oil
Hydraulic Oil
Quench Oil
Seal Oil
Automotive Oil
Compressor Seal Oil
Centrifuge Applications

Oil Reconditioning Equipment

Engineered Filtration specializes in bring old oil back to life.

Automotive Applications - We design filtration systems to maintain oil quality so that oil can be re-used, which we have applied to automotive manufacturing. We remove major contaminants including water, particulate, and sludge. Oil can be re-used while maintaining critical specifications.

These systems feature the low vacuum dehydration process.

Pumping & Filtration Equipment

Pumping stations include a pump and motor with filter vessel(s). These systems are designed from 2 GPM up to 5,000 GPM. Systems can also include heaters, bag filters strainers or cartridge filters. Both standard and custom engineered designs are available.

TORE - Pressure Coalescence System / Turbine Oil Conditioner

Our Turbine Oil Reclamation Equipment (TORE) is designed to remove harmful water and particulate from turbine lube oil reservoirs. Water is removed by coalescing the smaller drops into larger drops. As the water droplets get larger, they break away from the coalescer and fall to the bottom of the vessel. An automatic water drain opens when the water level hits the high point and water is drained by gravity and system pressure to drain. This system will remove free, emulsified and dissolved water to 150 ppm. ISO Cleanliness Codes are maintained well below OEM specifications.

Additional Details

Oil Regeneration System

GCA-UVR Series purifier regenerates, removes sulfur, removes paraffin, removes particulate, corrects acidity and lightens mineral oil, motor oil, transformer oil, hydraulic oil, diesel fuel and heating oil. The system uses the latest in sorbent technology. Oil regeneration uses a combination of filtration, heat, vacuum and absorption.
Sorbent consumption is approximately 5-17% by weight. Initial oil loss is 1- 5% by volume.


Motor Oil After One Pass	Diesel After One Pass	Transformer Oil After One Pass

Compressor Seal Oil Purification Equipment

Removes water, particulate and gases (such as hydrogen sulfides) from compressor seal oil. These systems are commonly used in oil refining and oil field applications. Systems are available for refrigeration compressor oil as well

Weather you are replacing existing Bowser filtration equipment or supplementing Bowser lube oil equipment, we can help increase filtration efficiency. Additionally, we offer portable filter carts, transformer high vacuum systems, low vacuum systems, oil systems, compressor oil purification systems, seal oil purification, custom engineering, vacuum dehydration, industrial oil purifiers, de gasification, fullers earth and other types of oil filtration equipment to correct color, total acid number (TAN) and/or remove water, moisture, gases, particulate, light end volatiles from industrial oils and lubricants.

For more information, call me directly at 603-881-4197 or Email