EFC Portable Filter Cart
Larger Filtering Capacity

The Engineered Filtration EFC Series Portable Oil Filter Cart is a filtration system that is ideal for off-line filtration and transfer of industrial lubricants, transformer and hydraulic oils. Primary uses include cleaning up contaminated systems and maintaining ISO Cleanliness Codes within reservoirs and tanks, as well as adding new oil to a system and transferring oils.

A large selection of filter medias are available including, pleated paper, pleated micro-glass and pleated stainless steel mesh. The most common media used is our ßx[c]=1000 micro-glass.

The EFC features a large filter vessel for maximum dirt holding capacity and efficiency. A heavy duty rotary gear pump with 1 HP motor provides 10 GPM of flow and is capable of pumping oil up to 10,000 SSU. Actual flow rate varies based on oil viscosity.

All components are mounted on a heavy duty base with 8” non-marking thermoplastic rear wheels and 4” locking swivel casters on the front. A handle is welded onto the rear, with grips, for easy maneuvering.

• Carbon Steel Construction
• UL Approved Rugged 115 Volt 1/2 HP Motor
• Pressure Gauges
• 10 GPM Rugged Gear Pump
• 8' - 1 " Suction & Discharge Hoses
• 25' Power Cord
• Strong Compact Rolling Carriage with Containment
• Semi-Pneumatic 10" Tires
• Wide Variety of Replacement Filter Elements from 0.5 Micron to 50 Micron Utilizing Pleated Paper, ßx[c]=1000 Microglass or Water Absorptive Medias

• HPV-1 Holds One 7" x 18" Filter Element
• HPV-2 Holds Two 7" x 18" Filter Elements -OR- One 7" x 36"Filter Element

• Pleated Paper For Particulate Removal 0.5, 1,2, 5, 10, 15, 20, 25, 30, 40, 50 Micron
• Water Removal 1/2, 1, 3, 5, 10, 25, 30, 40, 50 Micron
• Microglass ßx=200/ßx[c]=1000 X=1, 3, 6, 12, 25

Features

• Carbon Steel Construction
• 115V/120V Service (Other Voltages Available)
• 10 GPM Rugged Gear Pump (5 or 15 GPM Available)
• Plumbed with Stainless Steel Tubing
• 10' Suction & Discharge Hoses with Stainless Steel Dip Wand
• Power Cord
• Heavy Duty Hand Truck with Containment
• Top Loading Filter Housing with Bypass Valve and Color Coded Dirty Filter Indicator
• Available Filters include 2, 5, 10, 20 Micron ßx[c]=1000 Microglass and Water Absorptive

Compact design and comfortable handling
The compact design allows easy access to the oil tank. Cleanline portable comes ready to connect, with hose packages. The suction hose and the pressure hose
can be wound around the hose fixtures. Residual oil from the hoses is collected in the oil pan. The ultra-fine elements can be quickly changed without special auxiliary tools.

Technical Specifications

Flow Rate: 4.2 gpm
Suction Hose: 85" long,W/ mesh screen
Discharge Hose: 94.5" long with pipe end
Filter Elements: 3 µm (Micron) absolute
Part # V7.1220-13
1 µm (Micron) absolute
Part # V7.1220-113
Hydraulic Fluids: Mineral Oil and Biodegradable fluids
Electrical: 110 Volt / 60 Hz
Other Voltages Available
Weight: 41 Lbs.
Viscosity Range:  70 SSU – 1860 (model dependant)

Cleanline portable with OPCom
2 in 1: Cleanline portable with Oil Cleanliness OPCom
The Cleanline portable can be equipped with a Oil Cleanliness Monitor. The ARGO-HYTOS OPCom permanently monitors the current cleanliness class during
the cleaning or filling process.

When monitoring the cleanliness class a ball valve is used to select “upstream“ (before filter, e.g. when cleaning filled oil) or “downstream” (behind filter, e.g. when filling systems). The display area allows a choice of particle sizes: 4, 6, 14 or 21 μm. The display shows the classification number of the selected particle size, as specified by ISO 4406:1999.

The OPCom can be reconfigured with a PALM Organizer or alternatively via a PC with an infrared interface. The data can be transmitted to the computer via the RS232 interface so that the progression can be visualized and followed graphically or in table form.

Easy Transport
For easy transportation for FA 016 and FAPC 016 the trolley can be hooked onto the standing unit. Also, trouble-free transportation is possible for long distances.

Questions? Call or Email

PGF Portable Filtration

PGF Portable Filter Cart The  PGF Portable  Filter  is  a  heavy duty  and  compact  system  designed for efficient   filtration   of   industrial hydraulic and lubrication oils. Just roll  it  up, plug  it  in, and in just  20 minutes the PGF-1 cleans up to 100 gallons of oil, with no machinery shutdown.Downtime is cut, machinery life is extended and money is saved. PGF-1 Holds One 7” x 18” Filter Element PGF-2 Holds Two 7” x 18” Filter Elements -OR- One 7” x 36” filter element also available.

Features Carbon Steel Construction UL Approved Rugged 115 Volt 1/2 HP Motor Pressure Gauges 6 GPM Flow Rate 8 foot - 3/4” Suction & Discharge Hoses 25’ Power Cord On Automatic Recoil Reel Strong Compact Rolling Carriage Semi-Pneumatic 10” Tires Wide Variety of Replacement Filter Elements from 0.5 Micron to 50 Micron Utilizing Pleated Paper, Microglass or Water Absorptive Medias   Applications Hydraulic Oils Engine Oils Diesel Fuels Fuel Oils Full Flow Lube Oil Aviation Fuels Insulating Oils Turbine Oils Rolling Oils Quench Oils Model Flow GPM # of 7" x 18" Elements PGF-1 6 1 PGF-2 6 2

Ideal for high viscosity Lubrication and hydraulic oils (ISOVG22 ~ ISOVG320)

Filter new fluids during transfer and replenishment (top-off)Flush fluids already in service with high efficiency elements in addition to existing filtration (Reliability).

Remove particulate and water contaminant. Condition bulk oil before use.
Large element yields extended life.

Materials of Construction
Assembly Frame: Painted Steel Wheels: Rubber (solid, non-shredding) Filter Assembly: Epoxy coated steel
25 or 50 psid bypass available
True differential pressure indicator
Hoses: Reinforced synthetic
Wands: Steel

Operating Temperature
Nitrile (Buna)                 -40f to 150f
-40c to 66c
Fluorocarbon (Viton)*      -15f to 200f
-26c to 93c
*High temperature / phosphate ester design

Fluid Compatibility
Petroleum and mineral based fluids (standard). For polyol ester, phosphate ester, and other specified synthetics use Viton seal option or contact factory.

Weight
FCL1: 350 Lbs (159 kg) approximate

FCL2: 360Lbs (164 kg) approximate

FCL3: 430 Lbs (195 kg) approximate

Electric Motor Specifications
TEFC 56C frame
FCL1: 1 HP, 115VAC, 60Hz, 1P, 1750 RPM FCL2: 1 1/2 HP, 115VAC (FLA 16 Amps)
230VAC, 60Hz, 1P, 1750 RPM
or 440VAC, 60Hz, 3P, 1750 RPM FCL3: 3HP, 230VAC, 60Hz, 1P, 1750 RPM
220VAC, 50Hz 1P, 1425 RPM
or 440VAC, 60Hz, 3P, 1750 RPM

Recommended Viscosity Range*
FCL1*: 28 SSU ~ 4000 SSU, 6 cSt ~ 800 cSt FCL2*: 28 SSU ~ 4000 SSU, 6 cSt ~ 800 cSt FCL3*: 28 SSU ~ 2000 SSU, 6 cSt ~ 400 cSt

*At maximum viscosity clean element pressure drop on
6M media code < 10 psid.  Please check maximum viscosity of oil in coldest condition.

Pump Specifications
Gear pump
Internal relief full flow @ 100 psi standard.

Explosion Proof Option
Class 1, Div 2 explosion option is available.  Ask
About our pneumatic powered carts.

• Ideal for hydraulic fluids
  (ISO VG22 ~ ISO VG68)
• Filter new fluids during transfer and
  replenishment (top-off) Flush fluids already in service with
  high efficiency elements in addition to
  existing filtration. Remove particulate and water.
• Condition bulk oil before use.

Materials of Construction
Assembly Frame: Painted Steel
Tires: Rubber (foam filled, never flat)
Filter Assembly: Aluminum head, Steel canister
25 psid bypass valve
True differential pressure indicator
Hoses: Reinforced synthetic
Wands: Steel wands (zinc plated)

Operating Temperature
Nitrile (Buna) -40oF to 150oF
-40oC to 66oC
Fluorocarbon (Viton)* -15oF to 200oF
-26oC to 93oC
*High temperature / phosphate ester design

Fluid Compatibility
Petroleum and mineral based fluids (standard).
For polyol ester, phosphate ester, and other
specified synthetics use Viton seal option or
contact factory.

Weight
FC1: 140 Lbs (63,6 kg) approximate
FC2: 145 Lbs (66 kg) approximate
FC3: 235 Lbs (106 kg) approximate

Explosion Proof Option
Class 1, Div 2 explosion option is available, or
ask about our pneumatic powered cart.

Electrical Service
115VAC 60Hz 1P (standard) for FC1 & FC2
see options table for other selections

Electric Motor Specifications
TEFC or ODP, 56C frame
FC1: 1 HP, 1750 RPM, thermal overload reset
FC2: 1 HP, 1750 RPM, thermal overload reset
FC3*: 3 HP, 1750 RPM, thermal overload reset
*230VAC 1P or 440VAC 3P required for FC3
**No cord reel for FC3, any 3 phase or > 230 VAC

Recommended Viscosity Range
FC1*: 28 SSU ~ 2000 SSU, 6 cSt ~ 400 cSt
FC2*: 28 SSU ~ 1000 SSU, 6 cSt ~ 200 cSt
FC3*: 28 SSU ~ 1000 SSU, 6 cSt ~ 200 cSt
*At maximum viscosity clean element pressure drop with
3M media code < 12 psid/0.85 bar. Check maximum
viscosity of oil in coldest condition. For high viscosity
lubricating oils consider the FCL series or call

Pump Specifications
Gear pump
Internal relief full flow 100 psi, 6 bar standard