 |
|
Hi-Vac Solutions
With the higher cost for oils and ever increasing environmental
regulation and liability, it is no longer economical to replace
electrical insulating oils to renew their dielectric strength.
Restoring these oils to their original strength through purification
is now a necessity. Gulfgate Equipment, Inc. High Vacuum (Hi-Vac)
Oil Purification Systems are designed specifically to meet the
operational, economic and environmental needs of industry in
purifying insulating oils. Through proven dehydration, degasification,
and filtration techniques, Gulfgate's Hi-Vac Oil Purification
Systems quickly and easily remove:
- Free and emulsified water to
less than 10 ppm
- Free and dissolved air and gases
to 0.25% of total gas content
- Particulate matter to 0.5 microns
nominal (2.8 microns absolute)
- Other contaminants using unique
media designs
|
 |
Operation is a snap. Hi-Vac Systems
are easy to use and require very little maintenance. Even Gulfgate
replacement elements are very inexpensive. Hi-Vac Systems can
be used as stationary units or manufactured within a variety
of trailer configurations to be completely portable. Gulfgate
Equipment, Inc. has provided Hi-Vac Oil Purification Systems
to industry for more than 33 years. We have the expertise to
design a Hi-Vac Oil Purification System specific to your needs.
|
 |
|
Features & Benefits
- Systems designed and manufactured
to meet your specific needs
- Proven reliability backed by
more than 33 years of experience
- Streamlined, safe, quiet, dependable
operation
- Removes impurities without damage
to costly additives
- Removes free and emulsified
water to less than 10 ppm, free and dissolved air and gases to
0.25% of total gas content, varnishes, paints, acids, resins,
and oxidized agents
- Removes particulate matter to
0.5 microns nominal (2.8 microns absolute)
- Fullers Earth, activated carbon
and activated alumina filters available
- Fully pre-piped, pre-wired,
factory tested, and ready for immediate installation
- Controls designed for manual
or fully automatic operation
- Capable of full integration
into monitoring and control systems using Gulfgate's PLC options
- Electrical components enclosed
in NEMA IV weather proof housing
- NEMA VII explosion proof housing
also available)
- Modular design for easy monitoring
and maintenance
- Minimal training and man hours
to operate, limited demand and preventative maintenance, and
low cost element replacement
- Available as either a stationary
unit (skid mounted) or as a portable unit in several trailer
configurations
|
|
Specifications
- Systems customized with components
to meet your specific requirements
- Flow rates range from 30 GPH
to 3,000 GPH
- Vacuum pump capacity to 3,000
CFM
- Maximum vacuum pressure (blank
off) to 0.01 mm Hg (10 microns)
- Typical operating vacuum pressure
range during oil purification from 0.5 mm Hg to 5 mm Hg
- Full range of heater capacities
available including pre and post heaters
- Available in most voltages to
meet your specific needs
|
Please contact us at with your
specific purification requirements.
We will be happy to assist you with product specifications, information,
and pricing. |
